Please ensure that the exterior temperature is not below 10°C. In temperatures above 30°C, attach the Velcro strip to the garage door first and wait 24 hours (instead of 30 minutes) before attaching the cover.
How it works: brief instructions
Scope of deliveryYour garage door cover includes a complete set with separate self-adhesive Velcro strips and can be attached immediately.
To assemble your garage door cover you will need:
- approx. 30 - 60 minutes
- tape or folding rule
- felt-tip pen
- scissors or carpet cutter
- dry cleaning cloth and cleaning agent (e.g. spirit)
- possibly a spirit level
Installation Video
Assembly for single and large garages
Unpack the design and measure the garage door
Lay out the tools for assembly
Clean the edges of the garage door
Trim the design to fit
Stick the fuzzy side of the Velcro to the back of the cover
Stick the hook side of the Velcro to the garage door
Attach the cover to the garage door
Mark the location of the garage door handle and cut it out
All done!
Assembly instructionsAssembly for sectional doors
Clean the edges of the sectional door and measure the sections
Trim the design to fit
Attach additional hook Velcro to all edges of each section
Stick the fuzzy side of the Velcro to all edges of the back of the cover
Attach the trimmed covers to the sectional door
Mark the location of the garage door handle and cut it out
Attach the cover to each section one by one
When you open and close the door, neither the cover nor the door will be damaged
All done! Assembly instructions Please note!
You yourself are responsible for attaching a garage billboard and any consequences that may be caused. We also ask for your understanding that we cannot accept returns of trimmed covers.Source:- https://www.style-your-garage.com/en/Instruction-Sheet/
No comments:
Post a Comment